--- title: "Cantilever Rack in Washington, PA" url: https://pittsburghpalletracks.com/service-area/washington/cantilever-rack description: "Specify Washington long-load storage for energy-service stock, support spacing, and loaded access. Discuss new installations at (412) 866-1406." lang: en --- Image: Cantilever Rack system inside a Pennsylvania warehouse (https://pittsburghpalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Washington, Pennsylvania # Cantilever Rack in Washington, PA Cantilever rack in Washington separates long service stock from pallet shipments by carrying material on arms attached to upright columns. With no front columns across the loading face, operators can access pipe, tube, bar, and lumber along their lengths. The specification still depends on actual weight, load shape, bearing points, and the equipment used to lift each bundle. I-70 and I-79 connect regional receiving routes, while US-19 carries local commercial traffic through Washington County. An energy-service supply building may hold heavy service material beside outbound distribution orders. Those activities should not compete for the same working aisle. Plan their handoff before deciding how many storage faces the available space can accommodate. (412) 866-1406 ## Set cantilever rack capacity from real service loads For cantilever racking, list the load on each proposed arm and the combined demand on its upright. A total bundle weight does not explain whether material bears evenly across several supports or concentrates force at one position. Arm length must suit the load depth, and support spacing must suit the material’s length and stiffness. Check partial bundles as carefully as full receipts. Sheet stock and bulky service components deserve individual review. An approved support surface may be necessary for sheets, while an irregular piece may contact only selected arms. Do not infer suitability from an open face alone. Establish where the load bears, how it is restrained if needed, and how forks will enter without disturbing neighboring material. Compare single-sided cantilever rack perimeter rows with double-sided interior arrangements using the complete footprint. Base projections and material overhang reduce the clear working area beyond the upright line. If stock will remain outdoors, specify exposure conditions and a suitable finish and configuration; indoor storage assumptions do not settle weather-related requirements. Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor Call (412) 866-1406: (412) 866-1406 ## Arrange cantilever racking around loaded truck travel A forklift turning with long pipe needs more consideration than its empty dimensions suggest. Assess the loaded sweep, entry angle, and withdrawal from the arms. A side-loader can change the approach, but its operating requirements must be checked against actual receiving positions and the space reserved for outgoing orders. 1 ### Build a service-stock inventory Record the longest and shortest lengths, bundle depths, maximum weights, and irregular shapes. Distinguish material issued individually from complete packs moved directly into service preparation. 2 ### Confirm arm and upright demands Place bearing points beneath each load family and assess the resulting distribution. Resolve arm projection, support spacing, and vertical clearance together before choosing the final equipment arrangement. 3 ### Walk the handling route Measure the receiving approach and trace loaded turns into each proposed face. Identify intersections with shipping activity and leave space to lower, separate, and retrieve material without blocking adjacent stock. 4 ### Document new supply and placement Finalize the component schedule, finish, and installation layout. Check the agreed positions against base projections and include floor anchoring wherever the specified equipment arrangement requires it. ## Reserve cantilever storage rack for long-load work Selective pallet storage remains useful for unitized parts and boxed shipments supported on beams. The long-load alternative provides arms without front obstructions, allowing lengths to span multiple bearing points. Keep those purposes distinct when allocating space; a pallet-shaped footprint does not mean the underlying material can be supported like a pallet. We belong to Warehouse Equipment & Supplies Co. as a division continuing its equipment supply and installation work since 1997. More than 25 years in this field reinforces a practical distinction: storage capacity on paper is not the same as accessible stock. An arrangement must leave operators room to remove the intended load while neighboring service and shipping work continues. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Cantilever warehouse racking holding steel tubing (https://pittsburghpalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://pittsburghpalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Operations We Rack Around Here Energy-service supply and regional shipping can demand different handling rhythms near the interstate junction. Assign a receiving hold position so heavy service bundles do not spill into outbound order preparation. Energy service supply Manufacturing Regional distribution Consider long-stock support alongside selective pallet access; evaluate flow and drive-in systems separately for the rotation and density needs of packaged inventory. Pallet rack in Washington: https://pittsburghpalletracks.com/service-area/washington Cantilever system overview: https://pittsburghpalletracks.com/products/cantilever-rack Pallet flow in Washington: https://pittsburghpalletracks.com/service-area/washington/pallet-flow-rack Drive-in storage in Washington: https://pittsburghpalletracks.com/service-area/washington/drive-in-rack ## Warehouse Rack Systems Storage configurations for pallet handling, long material, and case picking. Image: Rows of industrial pallet racks loaded with pallets in a Pittsburgh warehouse (https://pittsburghpalletracks.com/assets/pallet-rack-2-je9-WSvK.jpg) Image: High-density pushback rack lanes loaded with pallets (https://pittsburghpalletracks.com/assets/pushback-2-ChZwIk2o.jpg) Image: Carton flow rack with gravity wheel beds and case lanes (https://pittsburghpalletracks.com/assets/carton-flow-rack-DfuFYV4P.jpg) Image: Pallet flow rack lanes with gravity rollers installed (https://pittsburghpalletracks.com/assets/pallet-flow-rack-2-IPjxgmn1.jpg) Image: Drive-in pallet rack lanes fitted with continuous rails (https://pittsburghpalletracks.com/assets/drive-in-pallet-rack-Cg418ibV.jpg) ## Get a Cantilever Rack Quote for Your Washington Warehouse Submit load weights, bearing diagrams where available, stock dimensions, and truck information. Identify outdoor exposure and any service components whose shape prevents even contact across the proposed arms. Call (412) 866-1406. ### Pittsburgh Pallet Racks 2681 Sidney St. Suite D Pittsburgh, PA 15203 (412) 866-1406 Monday - Friday: 8:00 AM - 6:00 PM ## Washington energy-service storage questions ### How should heavy pipe bundles be evaluated? ### Can short service lengths share a row with long stock? ### Is our forklift enough for a double-sided layout? ### Can a new outdoor row match indoor storage? ## Other Storage Services in Washington ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://pittsburghpalletracks.com/service-area/washington ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://pittsburghpalletracks.com/service-area/washington/pushback-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://pittsburghpalletracks.com/service-area/washington/carton-flow-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://pittsburghpalletracks.com/service-area/washington/pallet-flow-rack ### Drive-In Rack Forklifts enter deep storage lanes, trading individual pallet access for bulk storage capacity. View details https://pittsburghpalletracks.com/service-area/washington/drive-in-rack ### Warehouse Relocation Teardown, component labeling, transport coordination, and reinstallation planned around your move. View details https://pittsburghpalletracks.com/service-area/washington/warehouse-relocation ## Nearby Areas We Also Serve Across Washington County facilities, note which buildings carry reserve pipe and which assemble outbound service orders. Coordinate the inventory plan while allowing each address its own handling and access layout. Cantilever Rack in Pittsburgh: https://pittsburghpalletracks.com/service-area/pittsburgh/cantilever-rack Cantilever Rack in Monroeville: https://pittsburghpalletracks.com/service-area/monroeville/cantilever-rack Cantilever Rack in Cranberry Township: https://pittsburghpalletracks.com/service-area/cranberry-township/cantilever-rack Cantilever Rack in Robinson Township: https://pittsburghpalletracks.com/service-area/robinson-township/cantilever-rack Cantilever Rack in Bethel Park: https://pittsburghpalletracks.com/service-area/bethel-park/cantilever-rack Cantilever Rack in McKeesport: https://pittsburghpalletracks.com/service-area/mckeesport/cantilever-rack View All Service Areas: https://pittsburghpalletracks.com/service-area ## Where We Work Located in Pittsburgh, we serve the entire Greater Pittsburgh metro with industrial pallet racks and warehouse storage solutions. ### Pittsburgh Pallet Racks #### Address 2681 Sidney St. Suite D Pittsburgh, PA 15203 #### Phone (412) 866-1406 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Washington? Call (412) 866-1406 or request a quote and we will get a layout started. (412) 866-1406 Tap to Call: (412) 866-1406 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://pittsburghpalletracks.com/#business", "name": "Pittsburgh Pallet Racks", "alternateName": "Pittsburgh Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Pittsburgh, PA. Free warehouse design consultations, pallet rack installation, and storage optimization services across the Greater Pittsburgh metro.", "url": "https://pittsburghpalletracks.com", "telephone": "(412) 866-1406", "address": { "@type": "PostalAddress", "streetAddress": "2681 Sidney St.", "addressLocality": "Pittsburgh", "addressRegion": "PA", "postalCode": "15203", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "40.4258", "longitude": "-79.9624" }, "areaServed": { "@type": "City", "name": "Washington", "containedInPlace": { "@type": "State", "name": "Pennsylvania" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://pittsburghpalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/pittsburghpalletracks", "https://linkedin.com/company/pittsburghpalletracks", "https://instagram.com/pittsburghpalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://pittsburghpalletracks.com/service-area/washington/cantilever-rack#service", "name": "Cantilever Rack in Washington, PA", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "serviceType": "Cantilever Rack", "url": "https://pittsburghpalletracks.com/service-area/washington/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://pittsburghpalletracks.com/#business", "name": "Pittsburgh Pallet Racks", "telephone": "(412) 866-1406", "address": { "@type": "PostalAddress", "streetAddress": "2681 Sidney St. Suite D", "addressLocality": "Pittsburgh", "addressRegion": "PA", "postalCode": "15203", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Washington", "containedInPlace": { "@type": "State", "name": "Pennsylvania" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://pittsburghpalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://pittsburghpalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Washington", "item": "https://pittsburghpalletracks.com/service-area/washington" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://pittsburghpalletracks.com/service-area/washington/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How should heavy pipe bundles be evaluated?", "acceptedAnswer": { "@type": "Answer", "text": "Provide bundle weight, dimensions, and bearing positions. Review arm loading and total upright demand together, including uneven contact or shifting contents that could change the intended distribution." } }, { "@type": "Question", "name": "Can short service lengths share a row with long stock?", "acceptedAnswer": { "@type": "Answer", "text": "They can only share positions that provide adequate support for both. Short material may need closer bearing points or a separate arrangement rather than occupying gaps designed for longer bundles." } }, { "@type": "Question", "name": "Is our forklift enough for a double-sided layout?", "acceptedAnswer": { "@type": "Answer", "text": "Check the loaded turning envelope on both faces, not just truck width. Include base projections, fork withdrawal, and the space taken by nearby shipping stock before approving the layout." } }, { "@type": "Question", "name": "Can a new outdoor row match indoor storage?", "acceptedAnswer": { "@type": "Answer", "text": "Its inventory may be similar, but exposure changes the specification review. Confirm finish, weather suitability, product protection, and support requirements separately for the outdoor equipment." } } ] } ] ```